This is our budget range of access panels suitable for tiling on to. This 55mm deep access panel is non-fire rated has a door fitted with moisture resistant board and is supplied with a beaded frame (which allows tiles to bond on to). The panel has a lift out door that slots into two simple locating pins. The panel is fitted with a budget lock or touch catch as standard but other locking options are available. This panel allows the door to be fully removed for maximum access, so any maintenance can be carried out and also eliminating any contact between tile edge when opening. The maximum tile and adhesive thickness this panel can accept is 10mm.
This is our range of access panels suitable for tiling on to the panel has an 80mm deep frame and is non-fire rated; it is fitted with moisture resistant board and is supplied with a beaded frame (which allows tiles to bond to). The maximum tile depth and adhesive for this panel is 20mm.The access panel has a sliding bolt pin hinge which allows the door to be fully removable when required. The panel is fitted with a budget lock or touch catch as standard (please specify when placing an order) but other locking options are available. The hinged Tiledor is supplied as standard with a budget lock or touch catch and is also available with a 5mm bit (tamperproof) insert castellated lock for anti-tamper or a standard key lock, airtight tamperproof key lock and 3 way locking.
Our range of access panels are made from 1.2mm Zintec steel for maximum rigidity, other materials are available on request such as stainless steel. As standard our panels are finished in a polyester powder coating RAL 9010. For other colours contact our office.