Standard
upright ladders are designed with safety in mind
where access to vertical areas is required.
Ladders are manufactured from either Stainless
Steel or Aluminium and can be supplied with a
walkthrough, walkthrough and safety hoop or just
a simple ladder and hoop combination.
Safety hoops are recommended with ladders
where the ladder height exceeds 2500mm.
Safety hoops are available with an optional
mesh lined infill upon request.
Security closures to the bottom of the ladders
are also available and can be supplied with
a lockable hasp to the gate which is designed
to prevent unauthorized entry.
Ladder Width
- Standard ladders will have tubular
stringers set 400mm apart.
Rungs
- Cast aluminium
safe tread ladder rungs set at 250mm
centres.
Stringers
- 48mm O/D structural tube.
Specification
- Hoops: 50 x 5mm
- Tie Bar Strips: 30 x 5mm
Ladders are available in various heights.
(Refer to data sheet but please ask if the
required height is not shown).
Ladders can be supplied polyester powder
coated to any standard Ral colour.
|
Download
pdf(229kb)